agora inbox for [email protected]  

help / color / mirror / Atom feed

Re: Feature suggestions (long)
1916+ messages / 3 participants
[nested] [flat]

* Re: Feature suggestions (long)
@ 2003-05-19 08:46  Zeugswetter Andreas SB SD <[email protected]>
  0 siblings, 1 reply; 1916+ messages in thread

From: Zeugswetter Andreas SB SD @ 2003-05-19 08:46 UTC (permalink / raw)
  To: Martijn van Oosterhout <[email protected]>; pgsql-hackers

> Partitions
> ==========

> Next stage would be teaching the planner. The conditions would be
> pseudo-constraints on the partitions. Hence if the conditions and the
> constraints form a non-intersecting set, you can skip that partition
> altogether.

Make that "normal check constraints", and make the planner consider
constraints,
and I think that by itself combined with the current featureset will 
be much more powerful than any of the "partitioning" features out there.
(This is mainly needed to optimize selects on the big union all view)

Imho if a dba starts to partition, he usually needs to be more involved
than the average user, so I think he should be able cope with compexity.
What imho would help, is a tool that generates a suggested rule set,
indexes 
and actions, which the dba can review and apply. I do not think new SQL
syntax 
would really help, since that would somehow hide the great existing
power of 
the rule system. A tool would teach the dba, and empower him to use it.

And yes, creating several smaller tables and adding the appropriate
rules
usually makes the VLDB life much easier compared to growing single
tables into
the TB range.

Andreas



^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* Re: Feature suggestions (long)
@ 2003-05-19 09:32  Martijn van Oosterhout <[email protected]>
  parent: Zeugswetter Andreas SB SD <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Martijn van Oosterhout @ 2003-05-19 09:32 UTC (permalink / raw)
  To: Zeugswetter Andreas SB SD <[email protected]>; +Cc: pgsql-hackers

On Mon, May 19, 2003 at 10:46:04AM +0200, Zeugswetter Andreas SB SD wrote:
> > Partitions
> > ==========
> 
> > Next stage would be teaching the planner. The conditions would be
> > pseudo-constraints on the partitions. Hence if the conditions and the
> > constraints form a non-intersecting set, you can skip that partition
> > altogether.
> 
> Make that "normal check constraints", and make the planner consider
> constraints,
> and I think that by itself combined with the current featureset will 
> be much more powerful than any of the "partitioning" features out there.
> (This is mainly needed to optimize selects on the big union all view)

Very true. This would give you most of the benefits as well as helping in
other areas. I know there are functions within postgresql which attempt to
determine whether a condition is always true or false. All (ha!) you should
need to do would be to alter the SeqScan and IndexScan nodes to build the
expression:

(check_condition_a) AND (check_condition_b) AND ... AND (query_conditions)

and see if it simplifies to either TRUE or FALSE. Note that a simplification
would be more useful to strip irrelevent clauses from the query_conditions.

> Imho if a dba starts to partition, he usually needs to be more involved
> than the average user, so I think he should be able cope with compexity.
> What imho would help, is a tool that generates a suggested rule set,
> indexes and actions, which the dba can review and apply. I do not think
> new SQL syntax would really help, since that would somehow hide the great
> existing power of the rule system. A tool would teach the dba, and empower
> him to use it.

But the RULE system is not really suited to this. I havn't written it all
out but by my calculations the number of rules required is about (N^2+N)/2
where N is the number of partitions. That's one UPDATE rule for each pair of
tables plus a set of INSERT rules (DELETE requires nothing special). And
each of those rules will be used every single time that table is queried
(both inserts and updates). That's not terribly efficient.

Mind you, maybe there's a better way of doing it. I havn't totally gotten my
head around rules. Maybe it indicates that improvements could be made to the
rule system.

That's why what I'm suggesting pushing it down to a storage management
level, where the difficult issues simply go away.

> And yes, creating several smaller tables and adding the appropriate rules
> usually makes the VLDB life much easier compared to growing single tables
> into the TB range.

Amen.
-- 
Martijn van Oosterhout   <[email protected]>   http://svana.org/kleptog/
> "the West won the world not by the superiority of its ideas or values or
> religion but rather by its superiority in applying organized violence.
> Westerners often forget this fact, non-Westerners never do."
>   - Samuel P. Huntington


^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1916+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1916+ messages in thread